k15tk レジューム対応版(ただし英語版のみ)

レジュームするときにK15TKが機能しないといった感じのコメントがあったので。
K17TKと同じ対応を一応実装してみました。
コメントは日本語圏の方ではない方のようなので、英語版を修正しました。
私はK15TKが動作する環境を既に保有していないので、ロジック組んでビルドしただけです、一切のテストをしていないので動くかどうかもわかりません・・・・。
日本語版で使ってみたい方がいるようならコメント欄にでも書いてもらえれば、同じ修正を入れた日本語版をビルドしますが、提供できるのはおまけ機能がついちゃってるバージョンだけです。

という事で以下は日本語圏ではない方向け。

!!!! Please use it after understanding well because it is very important.

Resume support function was added to the English version of K15TK.
The English version is based on 0.0.3.0, so subsequent functions are not implemented, so be careful when using 0.0.4.x.

However, since I do not already have an environment that can run K15TK, I have not performed any tests. For this reason, it is not known whether the program will work correctly. Please use it after fully understanding that.
To enable the resume function, it is necessary to start K15TK by the following method. Please note that it will not be enabled even if the program is started by double clicking.
　・Start from the command line with the -rr option
　　　K15tk.exe -rr
　・Use k15tk in resident mode
　　For this reason, it cannot be used with the -e option.

Please download from the following.
　http://www.ockim.mydns.jp/files/k15tk_e_0031.zip

　desable restart manager
　http://www.ockim.mydns.jp/files/k15tk_e_0031_1.zip

コメント 31

もしもし hello I'm running using the task timer k15tk turn on turbo mode, but after 30-40 minutes when I look at the processor's frequency returns to the normal state of the turbo shut down, but the task timer seems to be running when I start the application k15tk seems to be running, but I want to solve the problem. I want the turbo mode to remain active continuously
by lisasu (2019-12-12 01:51) 

もしも hello I'm running using the task timer k15tk turn on turbo mode, but after 30-40 minutes when I look at the processor's frequency returns to the normal state of the turbo shut down, but the task timer seems to be running when I start the application k15tk seems to be running, but I want to solve the problem. I want the turbo mode to remain active continuously
by lisasuu (2019-12-12 02:50) 

申し訳ないのですが状況が良く分かりません。
問題点はなんでしょう？
起動から30~40分後にboostが無効になること？
K15TKのバージョンは？
K15TK起動時の引数はなんですか？
--------------------------------------------------
I'm sorry but I don't understand the situation well.
What is the problem?
Will boost be disabled 30-40 minutes after startup?
What is the version of K15TK?
What are the arguments when starting K15TK?


by kim (2019-12-12 10:32) 

version http://www.ockim.mydns.jp/files/k15tk_e_0031.zip
program is running in the background I opened the turbo frequency of the processor normal frequency 2.9ghz turbo frequency 3.5ghz cpu-z 3.500mhz but after 30 minutes when I opened the cpu-z program 2.900mhz is causing the reason why does not have a way to permanently change the msr records of the processor msr After a while the records are returning
my amd processor microcodes here
https://github.com/platomav/CPUMicrocodes/blob/master/AMD/cpu00670F00_ver06006705_2018-02-20_1026F331.bin

help me thanks
愛しています
by lisasu (2019-12-13 04:11) 

一定時間後にブースト周波数が変わるという事であるならK15TKに出来ることはありません。
K15TK以外のバックグラウンドプロセス、又は、電源管理によってMSRが書き換えられていると思われます。
考えられる対応策としては、タスクスケジューラーを利用して一定時間毎にK15TKを-eオプション付きで実行するくらいでしょうか。
-----------------------------------------------------------------
If the boost frequency changes after a certain period of time, there is nothing K15TK can do.
It seems that the MSR has been rewritten by a background process other than K15TK or by power management.
A possible countermeasure would be to run K15TK with the -e option at regular intervals using the task scheduler.

by kim (2019-12-13 22:48) 

link image: https://i.imgyukle.com/2019/12/13/RWDZV8.png
true?
I set it up this way, but after a while the program stops itself did I do wrong?
。
by lisasu (2019-12-14 04:28) 

-eはMSRを設定した後UIを起動することなく終了するオプションです、このためK15TKはすぐに終了します。
画像を拝見しましたが、一番下の項目が設定されていません。
この項目にはK15TK.EXEがあるフォルダーを設定してください。
----------------------------------------------------------------
The -e is an option to exit without starting the UI after setting MSR, so K15TK will exit immediately.
I saw the image, but the bottom item is not set.
Set the folder where K15TK.EXE is located in this item.

by kim (2019-12-17 16:53) 

k15tk use a detailed video about how to use and publish on youtube thank you and put a donation link there people will reward you.
リサ・スはあなたを愛しています
by lisasu (2019-12-18 01:40) 

Please make a new version of the k15tk software because msr records are reinstated. After a while you are actively updating the msr records please remove a new version and add new features. You are really a genius like nikola tesla.
愛してるよ、忘れないで
by lisasu'son (2019-12-26 07:57) 

申し訳ないのですが。
現在、私はK15アーキテクチャのプロセッサーを所有していません。
従って、K15TKに新しい機能を追加することは出来ません。
---------------------------------------------------------------
I'm sorry.
Currently I do not own a processor with K15 architecture.
Therefore, new functions cannot be added to K15TK.
by kim (2019-12-26 23:08) 

-StayOnTray - use this option with -nw for Clock Control Mode.(Note after a sleep if the CPU registers are resetted, voltages will revert to default, hence you need -StayOnTray to ensure it is always running in the background)
I HAVE PROBLEM k15tk error ınvalid argument
。
by lisasu'son (2019-12-28 21:12) 

それはリスタートマネージャによって自動的に起動されていると思われます。
K15tkはリスタートマネージャには対応していないので正しく起動されません。
リスタートマネージャを無効にしたバージョンを作成したので試してみてください。
ダウンロードはこの記事のダウンロードリンクを更新したのでそこからお願いします。
--------------------------------------------------------------
It seems to have been started automatically by the restart manager.
K15tk does not support the restart manager and will not start properly.
I have created a version with restart manager disabled, so try it.
Please download the updated download link in this article.


by kim (2019-12-29 11:50) 

program is running, but after a certain period of time the turbo boost shuts down frequencies return to their original state
画
by lisasu'son (2019-12-29 18:17) 

その件に関しては前に書いた通りK15Tkに出来ることは何もありません。
再度になりますが私はK15TKをアップデートするつもりはありません。
----------------------------------------------------------------
There is nothing K15Tk can do about it, as I wrote earlier.
Again, I do not intend to update the K15TK.

by kim (2019-12-29 22:15) 

I understand that but how can we fix this problem so why after a while the processor returns to its old speeds
字
by lisasu'son (2019-12-29 22:47) 

please help k15tk I want it to run continuously and renew itself If it can renew itself we can make it run continuously so that it does not return to the old frequencies again
の
by lisasu'son (2019-12-31 21:47) 

please add k15tk setup exe please せ
by lisasu'sonff (2019-12-31 22:46) 

I solved the problem 下
by lisasu (2020-01-02 16:50) 

I solved problem no problem I fixed perfect I am from turkey I am turkısh tesla
by lisasuds33'son (2020-01-02 19:14) 

あまりお役に立てず申し訳ありませんでした。
---------------------------------------------
Sorry for not helping so much.

by kim (2020-01-02 20:45) 

no problem kim you are a wonderful person.
get ready for zen 3 (On 6 January at ces2020)


れ
by lisasu (2020-01-05 00:11) 

Why has the voltage not changed?
problem photo: https://dosya.co/4s15ytq516kp/vıd.PNG.html

by dr.lisa su(mymom) (2020-01-10 20:41) 

Why has the voltage not changed?
problem photo: https://dosya.co/4s15ytq516kp/vıd.PNG.html

by dr.lisa su(mymom) (2020-01-10 20:41) 

Why has the voltage not changed?

problem image: https://www.dosyaupload.com/jzOR
像
by dr.lisa su(mymom) (2020-01-10 20:46) 

申し訳ありません。
Stoney ridge プロセッサーではK15TKは正しく動作しません。
理由は、KaveriプロっセッサーとStoney ridge プロセッサーにはMSRレジスターに非互換があるためです。
具体的な例としてはVIDのbit数が7bitから8bitに拡張されています、このためStoney ridge プロセッサーでは正しいVIDを設定できません。
-----------------------------------------------------------------
I'm sorry.
K15TK does not work properly with Stoney ridge processors.
The reason is that the MSR registers are incompatible between the Kaveri processor and the Stoney ridge processor.
As a specific example, the number of VID bits has been expanded from 7 bits to 8 bits, so the Stoney ridge processor cannot set the correct VID.

by kim (2020-01-10 23:24) 

Can you make changes in the program to solve it, please do it I would be very happy if I can not get a new computer for my financial situation is not good, I live in turkey please help me've liked you so much I love you
下
by dr.lisa su(mymom) (2020-01-10 23:47) 

申し訳ありません。
私は変更になった部分の仕様を理解していないのでアップデートすることは出来ません。
-----------------------------------------------------------------
I'm sorry.
I can not update because I do not understand the specification of the changed part.

by kim (2020-01-11 00:49) 

Do you know if there is any other alternative software
入
by dr.lisa su(mymom) (2020-01-11 00:57) 

申し訳ありません。
私の確認方法に間違いがありました。
Kaveri processorとStoney ridge processorにVID bitの非互換はありません。
ただ、画像では状況が分かりません。
従って私にできることはありません。
-------------------------------------------------------------------
I'm sorry
There was a mistake in my confirmation method.
There is no VID bit incompatibility between Kaveri processor and Stoney ridge processor.
However, the picture does not tell the situation.
So there is nothing I can do.

by kim (2020-01-11 10:50) 

Hi! It appears that your program doesn't run on Windows 10 1909 (latest update 2020-05). I have no idea though if it ran on previous version. I wanted to underclock/undervolt my A10-9600P which is seems to be supported.
れ
by EnderVAD (2020-05-30 01:49) 

具体的なエラー内容がわからないとお答えするのは難しいのですが、まずは以下を確認してみてください。
・WinRing0ドライバーがコピーされているか
・VCのランタイムは導入済みか
-------------------------------------------------------------
I can't answer if there is no specific error content, but first check the following.
　(1) WinRing0 Driver
Please copy the following files to the same folder as this program.
　　・32bit
　　　WinRing0.dll
WinRing0.sys
WinRing0.vxd
・64bit
　　　WinRing0x64.dll
WinRIng0x64.sys
We are checking the operation with the WinRing0 driver that was included
in TPC on us
(2) VC 2015 runtime library
Basically I am planning to have a static link, I think that it will work
without runtime, but maybe it is necessary.

by kim (2020-05-30 10:52)